Experimental Study on Glass Fibre Reinforced Concrete with ...

glass fibre reinforced concrete beam with copper slag as a partial replacement of fine aggregate. The parameters of the study included by replacing the fine aggregate by copper slag with 50%, 60%, 70% and by varying the volume fraction of glass fibre from 0 to 0.1% with an increment of 0.025%. The grade of concrete is M35.

AN EXPERIMENTAL INVESTIGATION ON CONCRETE BY …

various replacement percentages. The copper slag is used as partial replacement for fine aggregate varying in range of 20%, 40%, 60% in normal concrete and is tested for its optimum strength obtained as 58.54Mpa at 40% partial replacement. Then a concrete is designed with this optimum slag content as constant and the coarse aggregate

Copper slag as fine aggregate for high performance …

study the potential use of copper slag as fine aggregate on the strength of both normal and high strength concrete. Concrete mixtures were prepared using different proportions of copper slag as partial and full replacement of fine aggregate. The percentage of copper slag added by weight ranged between 10- of sand used in concrete.

Effects of Copper Slag as Partial Replacement for Fine ...

partial replacement of fine aggregate with copper slag. Addition of copper slag increases the density of concrete thereby increasing the self-weight, so that it can be used for high density concrete production. 4.9. Economic Feasibility Geopolymer concrete (GPC) manufactured using industrial waste like fly ash, GGBS and copper slag is

Study on Strength of High Performance Concrete by Partial ...

Replacement of fine aggregate by 55% of copper slag shows increase in flexural strength by 29% to the conventional concrete. Replacement of fine aggregate by copper slag up to 55% shows good result in strength characteristics of concrete, hence replacement of copper slag up to 55% is an opt for a high performance concrete.

(PDF) A STUDY ON COPPER SLAG AS REPLACEMENT OF FINE ...

This paper reports an experimental program to investigate the effect of using copper slag as a complete replacement of sand on the property of fine aggregate. Addition of red soil in ratio 0%, 5%, 10% in cement.M25 mix design has been used.

A Study on Concrete Mix Design of Partial and Full ...

A Study on Concrete Mix Design of Partial and Full Replacement of Copper Slag with Fine Aggregate A.K.Karthikeyan1, N.Monickavarsa2, M.Sandya3 1Assistant. Professor, Department of Civil Engineering, ULTRA College OF Engineering and Technology, Madurai, Tamil Nadu, India

A CASE STUDY ON COPPER SLAG AS PARTIAL …

The objective of this project is to study the copper slag as replacement of fine aggregate for 0%, 20%, 40%. Compressive strength test was conducted on the cubical specimens for all the mixes after 7, 14 and 28 days of curing as per IS 516 [7]. Three cubical specimens of size 150 mm x

Experimental Investigation on Concrete Using Copper Slag ...

replacement of coarse aggregates and copper slag for the partial replacement of fine aggregates. 0-50% replacement of sand with copper slag and 0-20% replacement of coarse aggregates with discarded rubber tyre pieces of 20 mm size. One set of cubes, cylinders and beams are prepared with 40% replacement with copper slag and 15% replacement with ...

An Experimental Study on Properties of Strength of ...

An Experimental Study on Properties of Strength of Concrete by Partial Replacement of Fine Aggregate with Copper Slag and Cement with Egg Shell Powder for M30 Grade Concrete Mohd Imran, Syed Saad Ali, Boda Vinod, Ramavath Sanjeev, Shaik Abdul Rasheed, Mohammed Ismail Khan

Utilization of Copper Slag in M-Sand as Partial ...

Utilization of Copper Slag in M-Sand as Partial Replacement of Fine Aggregate Prasanna Kumar C¹, Dr. Shashishankar², Raghavendra3 1Associate Professor and Head, DBIT, Bengaluru, India 2Professor and Head, AMC College of Engineering, Bengaluru, India Abstract: In India, there is a great demand of aggregates, mainly

Study on Mechanical Properties of Concreteon Partial ...

study concerns with the partial replacement of fine aggregate in conventional concrete. The reduction in the sources of natural ... increased by 55% at 40% replacement of fine aggregate by copper slag and flexural strength increased by 14 % for 40 % replacement.

A Study on the Partial Replacement of Fine Aggregate with ...

A Study on the Partial Replacement of Fine Aggregate with Copper Slag by Observing the Compression, Split Tensile and Flexural Properties V. Sushma M.Tech Student, Department of Civil Engineering, Visvodaya Engineering College, Kavali Dr. T. Suresh Babu Professor, Department of Civil Engineering, Visvodaya Engineering College, Kavali.

Durability Study of Concrete Containing Copper Slag as a ...

containing copper slag as partial replacement of fine aggregate in concrete The present study is based on trial mixes and achieving target strength. Mix proportions have been obtained for M30 grade concrete. Then copper slag is replaced by 0%, 10%, 20%, 30%, and 40% by the mass of fine aggregate to study the above tests

Effects of Copper Slag as Sand Replacement in Concrete

fly ash, silica fume and slag are being used into construction industry as a partial replacement to the fine aggregate. Similarly copper slag is a by-product from copper industry which can be used as a sand replacement into concrete. II. MATERIALS AND METHODS The raw materials used in this research were cement, fine and coarse aggregate, copper ...

INFLUENCE OF COPPER SLAG AS PARTIAL REPLACEMENT OF …

concrete with copper slag fine aggregate", The 5th CANMET/ACI International conference on durability of concrete, pp 141 – 158. 5. 5.Hwang CL, Laiw JC 91989), "Properties of concrete using copper slag as a substitute for fine aggregate", The 3rd International conference on fly ash, silica fume, slag,

Partial Replacement of Copper Slag as Fine Aggregate

copper slag. Fig.7. Comparison of Flexural Strength of Beam IV. CONCLUSION The concrete was prepared for the M 25 grade concrete with partial replacement of fine aggregate by copper slag with various percentages of 0%, 10%, 15% and 20%. The specimens were casted for 7days, 14 days and 28 days then tested. The results are presented above.

Effect Of Copper Slag On Mechanical Properties Of Concrete ...

various proportions of copper slag replacement with sand of 0 to in concrete. The results were compared with the nominal concrete tool. J Anne Mary, investigated the use of copper slag as partial replacement of fine aggregate and reported that,the strength

Experimental Study on High Strength Self - Compaction ...

of copper slag as partial and/or full replacement for fine aggregate in normal and high strength self-compacting concrete mixtures. The following were specific tasks: (1) Evaluate the effect of copper slag addition on the workability and density of normal and high strength self-compacting concretes. concrete.

Copper Slag Partially Replaces Fine Aggregate in M 25 ...

partial alternative for fine aggregate where its world annual generation is about 33 million tonnes. The project look through the use of copper slag as partial replacement to M sand and natural sand for the designed M 25 grade mix concrete. compressive strength

Studies on use of Copper Slag as Replacement Material for ...

Abstract. This work focuses on the use of copper slag, as a partial replacement of sand for use in cement concrete and building construction. Cement mortar mixtures prepared with fine aggregate made up of different proportions of copper slag and sand were …